The Weatherboard Journal

Villas, bungalows and the timber houses of Auckland

Timber sash windows: repair, reglaze or replace?

20 November 2026

The double-hung sash window is as much a part of the villa as the veranda. BRANZ says double-hung, vertical sliding windows were common up until the early 1920s, after which casements, often with fanlights above, became the usual thing for the 1920s and 1930s. If your house has sashes that rise and fall on cords, it was probably built before the bungalow took over.

Those windows are also usually the first thing a new owner wants to be rid of: they stick, they rattle, they leak heat. The good news is that, according to BRANZ, timber has excellent durability and can be repaired, and a large proportion of houses still have timber windows that can last a very long time if they are maintained. The sensible question is not whether to replace, but how much needs doing.

What the glass tells you about the age

Window glass was always imported into New Zealand, and Te Ara notes that in the early days it came in small panes, about 300 by 250 millimetres, which is why so many old windows are divided into multiple squares: a broken pane cost little to replace. Only the grandest houses had sashes glazed from a single piece. So a villa with a many-paned sash is behaving as it was designed to, and a single big pane in an old frame is more likely a later change.

Common faults, and what BRANZ suggests

BRANZ's guide, Looking into timber windows, lists the usual problems: paint deterioration, rot at the joints of sashes, sill and frame, sash joints opening up, loose or missing putty, sashes sticking because they are painted shut or because of broken cords or rusted pulleys, and loose or corroded hardware. It suggests inspecting windows annually.

The repairs it describes are modest:

Reglazing is not the same as double glazing

Reglazing in the plain sense, replacing a cracked pane and its putty, is a basic repair and keeps the window as it was. Double glazing is a separate decision, and for timber windows it is more feasible than people expect. BRANZ says timber windows can generally be modified to take an insulating glass unit (IGU) by removing the glass and enlarging the rebates in the sash. A typical retrofitted unit is 16 mm thick: two 4 mm panes with an 8 mm air gap.

Several conditions apply:

The BRANZ guide also says split-rail awning windows generally cannot take IGUs because the rails are too thin. That one applies to 1960s and 1970s houses more than to villas.

How much heat is at stake

The government's building guidance for existing homes puts single glazing's insulation value at only about one-twentieth that of an insulated wall, so as much heat escapes through one square metre of glass as through twenty of wall. It describes new double glazing as usually easy to fit but not cheap, suggests concentrating on heated and well-used rooms, and notes that secondary glazing systems in acrylic or glass can achieve insulation about as good as new double glazing. For old frames that do not close properly, it recommends draught-stopping strips. These details are on the Building Performance page for insulating existing homes.

That gives owners a ladder to climb: repair and draught-seal first, add secondary glazing or retrofit an IGU where it matters, and replace only when the sash or frame cannot be saved.

When replacement is justified

Replacement is sensible when the frame is rotten beyond splicing, when the sash cannot be modified to take glass, or when repair would cost more than the window is worth. BRANZ itself says that where extensive work is needed, replacement can be the more cost-effective option, and it lists degree of damage, difficulty of repair and cost as the factors to weigh.

Replacement does not usually need a building consent. Schedule 1 of the Building Act 2004 covers windows and exterior doorways in existing dwellings of no more than two storeys, except where the window being replaced has failed the code's durability requirements or the work affects a specified system. Resource consent is another matter. In an Auckland Special Character Area, the Unitary Plan's assessment text for pre-1940 buildings looks at whether alterations keep the original window size, proportion and position in the walls, and describes timber joinery as generally appropriate where it matches the original. A like-for-like timber replacement is the least contentious answer.

A note on old paint

Health NZ advises presuming that a building from the 1980s or earlier carries lead-based paint. It lists chemical stripping as a method usually used on small surfaces such as window frames, with safety glasses, overalls and gloves and a well-ventilated room, and it calls wet sanding the preferred option for keeping dust down.

Sources

Also in the journal