Rimu, kauri, mataī and tōtara in Auckland's old houses
Walk through an Auckland villa with the carpet up and you are standing on a small forest. The floor, the framing, the window sashes and the wall boards were cut from native conifers that were still plentiful when the house went up, and builders put each species where its particular habits suited it. Knowing which is which is partly curiosity and partly practical, because the right repair depends on knowing what you have.
A word of caution first. Timber identification is a craft, and colour alone is a poor guide once a century of paint, varnish and sunlight has had its say. What follows is a way of forming a sensible first guess from how and where each timber was used. If a decision matters, ask a joiner or a recycled-timber merchant to look at a sample.
Kauri, the first favourite
For much of the nineteenth century kauri was the timber of choice. Te Ara describes it as honey-coloured, light and strong, with a straight grain, and says it did not warp or shrink, which is why it was favoured for houses, boats and furniture. A Melbourne-based syndicate, the Kauri Timber Company, dominated the trade from 1888, and the industry peaked about 1905, according to Te Ara's account of the timber industry.
Kauri is a northern tree. The 1966 encyclopaedia entry places its true home from somewhat south of Auckland to the North Cape, so Auckland builders sat close to the supply. The same entry observes that the demand was such that the forests were soon almost cut out. By 1900, as Te Ara's building materials story puts it, kauri was depleted and mills turned to other native timbers, chiefly rimu and mataī.
In practice that means kauri is most likely in the earlier villas and in the better rooms, and less likely in a modest house built after the supply thinned.
Rimu, the workhorse
Te Ara's 1966 entry says rimu had been the main native building timber since about 1910, when it began to displace kauri, and calls the wood comparatively hard and dense. It is the species most people picture when they think of an old New Zealand floor.
BRANZ writes that the original floors in early twentieth-century villas and bungalows were tongue-and-groove boards, commonly heart rimu or mataī, sometimes mixed together, and occasionally kahikatea, tawa, Oregon or even jarrah. Boards vary from roughly 85 mm to 215 mm in width, with no standard sizes, and were often about 22 mm thick, according to BRANZ's renovation series. Because the two timbers were mixed at the time, a floor showing two tones is not necessarily patched.
Rimu also hides in the walls. In houses lined with scrim and sarking, the boards behind the wallpaper were often native rimu, which is worth knowing before anyone opens a wall.
Mataī, hard-wearing and often overlooked
The 1966 Te Ara entry says mataī is somewhat hard and brittle for a conifer, works to a satiny finish, wears extremely well, and is very durable except when in the ground. It names flooring and weatherboards as the work for which it was a choice timber, and notes that of the native timbers only rimu was cut in greater quantity.
That durability explains where it shows up in joinery. BRANZ says native softwoods were originally used for timber windows, with rimu typically used for frames, mataī for sills, and tōtara and kauri for sashes, in its guide to timber windows. The sill is the part of a window that stays wettest, so putting the toughest wood there was sound thinking.
Tōtara, for the parts that must last
Te Ara's 1966 entry says Māori prized tōtara above any other forest tree because of the remarkable qualities of its timber: the heartwood is very durable and could be readily split and shaped. The settlers valued it for house and wharf piles and for those parts of buildings requiring durable members.
So under a villa, tōtara is a reasonable expectation for the piles, and it features again in the sashes of old windows. As native supplies dwindled, window makers moved to Californian redwood, western red cedar, radiata pine, macrocarpa and other cypresses, and kwila, and combinations were common. A cedar sash in a pine frame is a later arrangement, not necessarily a poor one.
Reading a house for clues
A few habits make guesswork better.
- Look in the least-finished place. Inside a cupboard, under a floor or on the back of a spare board the timber has been spared the paint, and the true colour shows.
- Think about where the piece sits. Floor or weatherboard, probably rimu or mataī. Sill, possibly mataī. Sash, possibly tōtara or kauri. Pile, quite possibly tōtara.
- Let the age of the house guide you. Kauri favours the earlier houses, rimu and mataī the years after about 1900, and Oregon imported from North America can still be found in houses of the early 1900s, as Te Ara notes.
- Remember that mixing was normal. Two species in one room, or in one window, tells you about the builder's supply, not about a repair gone wrong.
BRANZ adds a useful observation for anyone opening up a wall: the original framing will be native heart timber, and even though it may be old it will usually be in good condition. That is the practical argument for repairing old timber rather than replacing it wherever the wood is sound and has stayed dry.
What this means when you need a match
If a board needs replacing, recycled timber is the sensible first call. BRANZ says recycled floorboards are proven to last at least one lifetime, and names demolition yards as the best source of extra boards, with matching profiles and a patina that suits the existing floor. It advises wetting a board to see the colour it will finish, since it is easier to find the colour in the wood than to chase it later with stain. The same thinking applies to other old joinery profiles, though it is wise to ask the supplier what the timber actually is.
For anything structural, or where rot is involved, bring in a licensed builder. A soft tōtara pile is not a job to guess at.
Sources
- Te Ara, Building materials: Early houses
- Te Ara, The timber industry, 1840-1920
- Te Ara, 1966 Encyclopaedia of New Zealand entries for kauri, rimu, mataī and tōtara
- BRANZ, Getting down to it
- BRANZ, Looking into timber windows